Mounted Arrow Boards For Sale

Vehicle Mounted Arrow Boards for Sale, Built for Australian Traffic Management

A vehicle mounted arrow board is one of the most visible and high-impact safety devices in any traffic management operation. Whether your crew is closing a lane on a high-speed motorway, protecting a mobile maintenance team on a busy urban arterial, or directing traffic around a short-notice incident response, a clear, bright, and reliable arrow board changes how road users react.

INNOV8 Equipment supplies vehicle mounted arrow boards for sale to traffic management companies, civil contractors, mining operators, and infrastructure crews across Australia and New Zealand, with our head office and manufacturing base in Sydney supporting customers nationally through our distributor network.

Our mounted arrow boards are purpose-built for the conditions Australian crews work in every day. From the busy construction corridors of Sydney to remote highway projects across regional NSW and beyond, every unit is engineered to give drivers clear, unambiguous directional information at a distance, helping to slow approaching traffic, guide vehicles safely past the work zone, and reduce the risk of rear-end and side-swipe incidents.

Why a Vehicle Mounted Arrow Board Is Essential on Modern Worksites

A mounted arrow board is no longer a nice-to-have. On most Australian worksites, it has become a core piece of safety equipment that traffic management plans are built around. The reason is straightforward. A driver approaching a work zone at highway speed has only seconds to recognise the hazard, understand which lane to move into, and adjust their position. A high-intensity LED arrow gives them that information at a glance, well before they reach the work area, and well before reactionary braking or sudden lane changes become a risk.

Compared with a trailer-mounted board, a vehicle mounted arrow board offers a number of practical advantages on site. It moves with the vehicle, so it can be repositioned instantly as the work progresses, which is particularly valuable on mobile maintenance jobs, line-marking runs, and rolling closures. It removes the need to tow and reverse a separate trailer into tight or congested locations, which speeds up setup and pack-down. And because it is permanently installed on the host vehicle, it is always with the crew when they need it, ready to be deployed without coordinating a separate asset.

How INNOV8 Equipment Builds and Delivers Your Arrow Board

INNOV8 Equipment specialises in the sale, manufacture, and distribution of traffic management equipment, and our vehicle mounted arrow boards are designed and built in-house to suit the way Australian crews actually work. The process begins with a conversation about your fleet, your typical jobs, and the host vehicle the board will be installed on. From that, our team recommends the most appropriate platform from our two-size range, the Light Vehicle Arrow Board for utes and light commercial vehicles, or the Heavy Vehicle Arrow Board for trucks and larger traffic management vehicles.

Each installation is then tailored to the vehicle. Because no two utes, trays, or truck bodies are configured the same way, our fabrication team works through the mounting options to deliver a clean, secure, and compliant fit-out that does not compromise your existing fleet setup. We commit to quick turnaround times on every order, with a full quote provided within 24 hours of your enquiry, and a build completed to the standard you would expect from a specialist Australian manufacturer.

High Visibility, Low Power, Long Life

The performance of an arrow board comes down to two things. How clearly drivers can see it, and how reliably it performs day after day. Our vehicle mounted arrow boards use a full-colour, high-intensity LED display that remains crisp and legible in direct Australian sunlight, in heavy rain, and through the dust and glare of dawn and dusk operations.

An integrated light sensor automatically adjusts the brightness of the display to suit the ambient conditions, which keeps the board readable at long range during the day and prevents it from over-driving and dazzling drivers at night. Together, the high-intensity LED display and automatic brightness controls ensure visibility both day and night, with consistent legibility across a wide range of ambient light conditions.

Low power consumption is built into the design from the start. LED technology draws a fraction of the energy of older incandescent or halogen alternatives, which means the board can run for extended periods without flattening the host vehicle’s battery, and without forcing your crew to leave the engine idling for hours on site. For traffic controllers running long shifts on extended closures, this is a meaningful operational benefit and a cost saving across the life of the asset.

Easy to Operate, Built to Australian Standards

Every arrow board we manufacture is operated through a user-friendly touch screen controller installed in the cabin of the host vehicle. The operator can select the required arrow pattern, whether that is a right arrow, a left arrow, or a double-headed arrow, without leaving the safety of the cab. This is a genuine safety improvement on older systems that required the operator to exit the vehicle to change patterns, particularly on high-speed roads and in poor weather.

The controller is designed to be intuitive enough that a new operator can be trained on it in minutes, which simplifies onboarding for new crew members across your business. Each arrow pattern is displayed through a sequence of flashing LEDs that grabs the attention of approaching drivers and reinforces the required lane change long before they reach the work zone.

All INNOV8 mounted arrow boards are built to meet the relevant Australian Standards for road traffic signal devices, giving your operations team and your clients confidence that the equipment will be accepted under the traffic management plans you work to. Compliance is not an afterthought in our build process, it is a starting point, which is why our boards are specified into projects by some of the largest civil and traffic management contractors in the country.

Arrow Boards Sydney and Australia-Wide

Our manufacturing base in Sydney means that customers across NSW have direct access to our team for site visits, installations, and ongoing service support. Beyond Sydney, we deliver vehicle mounted arrow boards into every Australian state and territory, with established distributor relationships supporting customers in Western Australia, the Northern Territory, Victoria, Queensland, and across into New Zealand.

Wherever you are based, our team coordinates the build, delivery, and after-sales support, so you receive the same standard of product and service regardless of your location. Our arrow boards are used across road and highway projects, construction sites, civil infrastructure works, mining haul road operations, and council maintenance fleets.

Whether you are a single-vehicle operator looking to upgrade a single ute or a national contractor adding to a fleet of dozens of traffic control vehicles, our team can support you through every stage of the purchase, from initial specification through to commissioning on the host vehicle. To discuss your requirements for a mounted arrow board, or to request a quote within 24 hours, give us a call on 1300 071 007 today.

Mounted Arrow Boards FAQs

What is the typical turnaround time from order to a fitted arrow board?

Turnaround depends on the host vehicle and the configuration you have selected, but as a guide, most mounted arrow board installations are completed within a few weeks of the order being confirmed. Once we have received your vehicle for fit-out, our fabrication and installation teams work to an agreed schedule so you can plan crew rosters and project mobilisation around a known delivery date. We confirm timing in writing as part of the quote, so there are no surprises later in the process.

Will fitting a mounted arrow board affect the warranty or registration of my host vehicle?

Our installations are carried out by experienced fabricators using mounting solutions designed to integrate cleanly with the host vehicle’s structure. We work to ensure the fit-out does not compromise registration compliance or void the manufacturer warranty of the base vehicle. If your host vehicle is still under a manufacturer warranty, we recommend speaking with our team during the quoting stage so we can confirm the specific installation approach and provide any documentation you may need to share with your fleet manager or dealer.

What warranty does INNOV8 Equipment provide on its mounted arrow boards?

Every mounted arrow board we manufacture is supplied with a workmanship warranty on the fabrication and installation, along with the manufacturer warranty on the LED display, controller, and associated electronic components. Specific warranty periods are set out in your purchase documentation. Beyond the warranty period, our service team continues to support customers with parts, repairs, and upgrades for the working life of the unit.

Can I retrofit an INNOV8 mounted arrow board to an existing vehicle in my fleet, or does it need to be a new build?

Both options are available. Our mounted arrow boards can be installed on a new vehicle as part of a full fit-out, or retrofitted to an existing vehicle already in your fleet. For retrofits, we ask for some basic information about the host vehicle, including make, model, body type, and any existing fit-out, so we can design a mounting solution that suits the available space and load capacity.

What ongoing maintenance does a mounted arrow board need?

Mounted arrow boards are designed for low maintenance, but a periodic visual inspection of the display face, mounting brackets, and wiring is good practice, particularly after long trips on unsealed roads or after severe weather. The full-colour LED display has a long service life, and the touch screen controller is solid-state with no moving parts. If you do encounter any issue with the display, controller, or mounting, our service team can advise on parts and repairs through our Sydney base or our distributor network.

Do you supply spec sheets and documentation for inclusion in a traffic management plan?

A downloadable spec sheet is available directly from the mounted arrow boards product page, and our team can provide additional technical documentation, compliance information, and product imagery for inclusion in your traffic management plans, tender submissions, or fleet specifications. This is particularly useful for contractors who need to demonstrate equipment compliance to a principal contractor or road authority before mobilising to site.

Can I buy a mounted arrow board outright, or are finance options available?

INNOV8 Equipment sells mounted arrow boards outright. We do not operate a hire fleet, so every unit is supplied as a permanent addition to your fleet. For customers who would prefer to spread the cost of the purchase, we can introduce you to finance partners who provide chattel mortgages, equipment leases, and similar arrangements suited to commercial vehicle fit-outs. Our team can discuss this during the quoting process so you can choose the option that best suits your business.