Light Truck Mounted Attenuator
The Light Truck Mounted Attenuator (LTMA) is designed for impact protection at speeds of 70km/hr or less and is the smallest TMA available in Australia.
- Australia’s MASH Approved TMA
- Superior Crash Performance
- CE Marked & EMC Compliant
Light TMA Features
- Absorb crashes at speeds up to 70km/hr
- Suitable for 3.5 tonne vehicles
- Lightweight aluminum crash cushion
- Galvanized steel support structure
- Hydraulic lifting frame
- Easy control system
- Half the size of a regular TMA
- Galvanised steel support structure
- Hydraulic lifting frame
- Fitted with an Arrow Board and/or VMS board (optional)
INFORMATION
DETAILED DESCRIPTION
The Blade TMA is a patented crash cushion designed to safely absorb the impact of errant vehicles travelling at speeds of 100km/hr or under. It is attached to the rear of a host vehicle with the purpose of protecting exposed workers against traffic while they’re working on and alongside active roads.
INNOV8 Equipment are leaders in compliance, whereby we were the first TMA provider to reach out to the Australian Government in 2016 to get the TMA regulated and tested for “crashworthiness”. The Blade TMA Tested and approved according to the Manual for Assessing Safety Hardware (MASH) safety standards, the Blade TMA is recommended for acceptance by the Austroads Safety Barrier Assessment Panel (ASBAP) and adheres to National Heavy Vehicle Regulator (NHVR) standards. We are also compliant with State and Territories legislation.
The Blade TMA has been live crash tested (no truck fixing) to mimic a real-life impact. Testing in a true-to-life scenario allows for the accurate measurement of what is called Roll Ahead Distance. This term refers to how far forward the host vehicle will travel in the event of a rear impact. INNOV8 Equipment meets our legal obligations under Australian Standards, whereby it is required that all TMA’s have a Roll Ahead Distance recorded under test conditions. The Blade TMA also has a registered minimum and maximum support vehicle mass for utmost vulnerable road user and road worker safety.
The Blade TMA provides next-level safety, built for the future and for the protection of vulnerable road users and workers. The Blade TMA’s G Force Reduction technology showcases our dedication to protecting road workers AND vulnerable road users. If an accident was to occur, the TMA’s unique 12-Blade design dissipates the crash energy and slows the vulnerable road user down from speeds of up to 100km/hr. As an additional safety measure, 4 electric motors act like a roller coaster brake, whereby the G Force ride down is safely dissipated. This means the likelihood of a vulnerable road user travelling through the windscreen or being injured is reduced.
The Blade TMA comes with Rear Under Ride Protection as standard to the rear of the trailer. When vehicles crash into the Blade TMA, they avoid the underrunning of the TMA at the rear side because of this safety feature, which reduces the chances of fatalities and severe injuries.
The Blade TMA was also designed to safely protect and redirect the impacting vehicle away from the “coffin corner”. A phrase in the traffic management industry to describe a driver hitting the corner of the truck mounted attenuator is the “coffin corner”, as crashing into this often leads to significant injury or death for the driver of the errant vehicle. The Blade TMA’s impact plate width is the same width as the truck tray, significantly wider than most products on the market today. The dimensions of the means that the TMA can safely capture the entire vehicle and safely disperse the energy from the crash, protecting the vulnerable road user.
Not only does the Blade TMA offer the highest level of impact protection but it is also easy and efficient to operate. With the push of a button from inside the safety of the cab, it takes only 20 seconds for the TMA to move from transport to full operating position. Fast deployment and pack up optimises efficiency. In addition, the vertical transport position means no loading space is lost on the truck bed as with a fold over attenuator, and the open design creates less wind resistance and vibration while driving.
INNOV8 Equipment chooses to mount the Blade TMA to the IVECO Eurocargo for several reasons including, its unlimited idling hour warranty, Euro6 environmental rating and AEB braking system included as standard.
- Crash Testing: Meets MASH 2016 TL-3 standards and compliant to Australian AS3845.2.2017 standards
- Power Supply: Operated via a wired cabin controller, powered by a 175 Amps plug compatible with 12Vdc or 24Vdc systems.
- Structure: Galvanised steel structure with a customisable aluminium crash cushion.
- Hydraulics: Equipped with a complete hydraulic unit and electronics housed in a closed box.
MEASUREMENTS
PERFORMANCE & TECHGNOLOGY
While every TMA is created with the same core objective, differences in construction and technology lead to unique performance characteristics during an impact.
The Blade TMA, for instance, is engineered using the latest European safety technology. It is designed to minimize damage and debris while providing maximum protection for all individuals involved in or near a collision. By absorbing and safely dispersing the energy from an impact in a controlled, smooth motion, the Blade TMA helps reduce the risk of injury.
- Patented 12-blade design
- Energy absorption and safe dispersion
TESTING & ACCREDITATION
- MASH Crash Tested and Approved with Roll Ahead Distance
- ASBAP Recommended for Acceptance throughout Australia
- Compliant to Australian AS3845.2.2017 standards
- Built to required NHVR standards VSG-11 & VSG-12
- IVECO Manufacturer approval to mount the Blade TMA to the Eurocargo
- Approved for use by regulators in NSW, VIC, QLD and WA
DETAILED DESCRIPTION
The Light Truck Mounted Attenuator (LTMA) is designed for impact protection at speeds of 70km/hr or less and is the smallest TMA available in Australia. What’s the benefit of a TMA around half the size of a regular TMA truck? Its small size means reduced road wear and tear, and improved traffic flow while still providing the necessary impact protection for workers.
There’s no need to place a heavy truck on light limit roads when you have the LTMA. Ideal for use on metropolitan and city roads, and streets that have reduced speed limits due to ongoing construction. Tested and approved according to Australian Standards, every LTMA sold through INNOV8 Equipment comes Blue plated and approved by an Authorised Vehicle Examiner. Plus, it only requires a Light Rigid licence to drive. INNOV8 Equipment can also offer a comprehensive list of customisable accessories, such as arrow and VMS boards, to suit your needs and fit within your budget.
The Light Truck Mounted Attenuator (LTMA) is engineered to provide impact protection for work zones with speed limits up to 70 km/h. As the most compact TMA available in Australia, its reduced size offers several advantages, including decreased road wear and improved traffic flow, all while maintaining essential safety standards.
Key Benefits:
Compact Design: Approximately half the size of standard TMA trucks, the LTMA is ideal for metropolitan and urban environments where space is limited and maneuverability is crucial.
Versatility: Suitable for deployment on roads with light load limits, eliminating the need for heavier vehicles in areas where they are impractical or prohibited.
Regulatory Compliance: Tested and approved in accordance with Australian Standards, each LTMA is delivered with Blue Plate certification and authorization from an Accredited Vehicle Examiner.
Operator Accessibility: Operable with a Light Rigid (LR) license, broadening the pool of qualified drivers and facilitating easier integration into existing fleets.
Customisation Options:
INNOV8 Equipment offers a range of customisable accessories to enhance the functionality of the LTMA, including:
Arrow Boards: For clear directional guidance.
Variable Message Signs (VMS): To convey real-time information to motorists.
These accessories can be tailored to meet specific operational requirements and budget constraints.
Unique Selling Points:
- Compact and Lightweight Design: The LTMA 70KM is about half the size of a regular TMA truck, making it perfect for metropolitan and city roads. This smaller design helps reduce both traffic congestion and road damage.
- Improved Traffic Flow: Ideal for use on roads with ongoing works and reduced speed limits, this attenuator improves the flow of traffic while providing essential safety for workers and road users.
- Versatility and Customisation: Available for new builds or upgrades to existing vehicles.
- Customisations include:
- Airbag suspension
- Drop wells
- Sign cages
- Arrow boards
- Amber warning lights
- UHF radio and more
- Ease of Operation: Only requires a Light Rigid drivers license for operation, making it easier for operators to use across a range of environments.
- Safety Compliance: Meets stringent safety standards:
- VSG11 standards (for Australian roads).
- NCHRP-350 TL-2 certification, ensuring it has passed full-scale crash tests.
- Efficient for Short and Long-Term Projects: Perfect for both short-term and long-term road projects, offering flexibility and reliability over time.
Commitment to Safety and Compliance:
As pioneers in TMA safety, INNOV8 Equipment initiated efforts in 2016 to collaborate with the Australian Government, aiming to establish regulations and testing protocols for TMA crashworthiness. This proactive approach underscores our dedication to advancing road safety standards nationwide.
MEASUREMENTS
PERFORMANCE & TECHNOLOGY
While all Truck Mounted Attenuators (TMAs) share the primary goal of safeguarding road workers and motorists, variations in design and technology result in distinct performance attributes during collisions. The Light Truck Mounted Attenuator (LTMA) 70KM exemplifies this with its compact and lightweight construction, tailored for urban environments. Despite its reduced size, the LTMA 70KM is engineered to effectively absorb and dissipate impact energy, thereby minimizing damage and enhancing safety for all parties involved in or near a collision. This design ensures that, even in low-speed zones, the attenuator provides robust protection by controlling and reducing the force of impacts.
Additionally, the LTMA 70KM is equipped with advanced warning indicators, such as reflective materials and lights, to alert drivers from a distance, further contributing to the prevention of accidents and the protection of both workers and motorists.
TESTING & ACCREDATION
NCHRP-350 TL-2 Certification: The LTMA has undergone rigorous full-scale crash testing and meets the National Cooperative Highway Research Program (NCHRP) Report 350 Test Level 2 standards, ensuring its effectiveness in impact protection at speeds up to 70 km/h.
Compliance with Australian Standards: The LTMA adheres to Australian safety regulations, including the National Heavy Vehicle Regulator (NHVR) standards, specifically Vehicle Standards Guide 11 (VSG11), which outlines the requirements for vehicle modifications and safety features.
Blue Plate Certification: Each LTMA is Blue Plated and approved by an Authorised Vehicle Examiner, indicating it has been inspected and meets the necessary safety and design standards for operation on Australian roads.
Automatic Impact Brake System (AIB): It is recommended that TMAs be equipped with an Automatic Impact Brake System that meets Australian Design Requirements (ADR) in accordance with Austroads standards, enhancing safety during sudden stops or impacts.
Operator Training and Certification: Operators of the LTMA are required to undergo specific training, such as the “Operate Truck or Trailer Mounted Attenuators” course (RIIRTM301E), to ensure they possess the necessary skills and knowledge for safe and efficient operation.
BLADE TMA
VS
SCORPION TMA
View the enhanced features of the Blade TMA compared to the Scorpion TMA.
LEARN MORE ABOUT THE BLADE TMA
Watch the Innov8 team demonstrate the Blade TMA’s unique capabilites.
